This bsd uses STD_1149_6_2003, which I have been unable to find,
except in "The Boundary-Scan Handbook", at Google books [1].

I tried to copy the text into /usr/share/urjtag/bsdl/STD_1149_6_2003,
but I keep getting errors like:
***@ck-move:~/gen_jtag$ bsdl2jtag xc7k325t_ffg676.bsd xc7k325t_ffg676
error: -E- error: In Package STD_1149_6_2003, Line 11, Error in
User-Defined Package declarations.
error: -E- error: BSDL file 'xc7k325t_ffg676.bsd' contains errors in
VHDL stage, stopping
error: vhdl subsystem: Parser error, see log for details

Something might be missing from the STD_1149_6_2003?



If I remove "use STD_1149_6_2003.all" from the BSD, I get five
different "Unsupported BSDL construct found". These are:

=3D> Number 1
attribute PORT_GROUPING of XC7K325T_FFG676 : entity is
"DIFFERENTIAL_VOLTAGE (" &
"(MGTXRXP0_115, MGTXRXN0_115), " &
"(MGTXRXP0_116, MGTXRXN0_116), " &
"(MGTXRXP1_115, MGTXRXN1_115), " &
"(MGTXRXP1_116, MGTXRXN1_116), " &
"(MGTXRXP2_115, MGTXRXN2_115), " &
"(MGTXRXP2_116, MGTXRXN2_116), " &
"(MGTXRXP3_115, MGTXRXN3_115), " &
"(MGTXRXP3_116, MGTXRXN3_116), " &
"(MGTXTXP0_115, MGTXTXN0_115), " &
"(MGTXTXP0_116, MGTXTXN0_116), " &
"(MGTXTXP1_115, MGTXTXN1_115), " &
"(MGTXTXP1_116, MGTXTXN1_116), " &
"(MGTXTXP2_115, MGTXTXN2_115), " &
"(MGTXTXP2_116, MGTXTXN2_116), " &
"(MGTXTXP3_115, MGTXTXN3_115), " &
"(MGTXTXP3_116, MGTXTXN3_116))";

=3D> Number 2
attribute AIO_COMPONENT_CONFORMANCE of XC7K325T_FFG676 : entity is
"STD_1149_6_2003";

=3D> Number 3
attribute AIO_EXTEST_Pulse_Execution of XC7K325T_FFG676 : entity is
"Wait_Duration TCK 15";

=3D> Number 4
attribute AIO_EXTEST_Train_Execution of XC7K325T_FFG676 : entity is
"train 30, maximum_time 120.0e-6";

=3D> Number 5
attribute AIO_Pin_Behavior of XC7K325T_FFG676 : entity is
"MGTXRXP0_115 : LP_time=3D22.5e-9 HP_time=3D45.0e-9; " &
"MGTXRXP0_116 : LP_time=3D22.5e-9 HP_time=3D45.0e-9; " &
"MGTXRXP1_115 : LP_time=3D22.5e-9 HP_time=3D45.0e-9; " &
"MGTXRXP1_116 : LP_time=3D22.5e-9 HP_time=3D45.0e-9; " &
"MGTXRXP2_115 : LP_time=3D22.5e-9 HP_time=3D45.0e-9; " &
"MGTXRXP2_116 : LP_time=3D22.5e-9 HP_time=3D45.0e-9; " &
"MGTXRXP3_115 : LP_time=3D22.5e-9 HP_time=3D45.0e-9; " &
"MGTXRXP3_116 : LP_time=3D22.5e-9 HP_time=3D45.0e-9; " &
"MGTXTXP0_115; " &
"MGTXTXP0_116; " &
"MGTXTXP1_115; " &
"MGTXTXP1_116; " &
"MGTXTXP2_115; " &
"MGTXTXP2_116; " &
"MGTXTXP3_115; " &
"MGTXTXP3_116 ";

Number 2 to 5 is depending on the structure found in STD_1149_6_2003
and I guess this is why they don't work. As I read [1] the AIO
attributes are used for testing advance IOs and I assume that when I
only wants to program the device, I can skip this?

As I am using the Ubuntu version of UrJTAG (UrJTAG 0.10 #2007), error
number 1 might be similar to [2]

If I comment out the above code, bsdl2jtag will generate a file which
looks similar to the once shipping with UrJTAG for other device. But,
I am afraid that I might toast our FPGA :)


So, I basically have two questions:
1) Have everyone succeeded using UrJTAG with Xilinx Kintex7 or other
series 7 FPGAs?
2) Does my above assumptions seem ok? :)

Best regards
Christoffer Kj=F8lb=E6k

[1] http://books.google.dk/books?id=3DaUCgNOpyUbgC&lpg=3DPA308&ots=3DavOPFA=
Xbo9&dq=3Duse%20STD_1149_6_2003.all%3B%20bsdl&hl=3Dda&pg=3DPA308#v=3Donepag=
e&q=3Duse%20STD_1149_6_2003.all;%20bsdl&f=3Dfalse
[2] http://comments.gmane.org/gmane.comp.embedded.jtag.urjtag.devel/1283

--=20
Christoffer Kj=F8lb=E6k
Electronics Designer, M.Sc.Eng
Move Innovation

Phone: +45 32 20 50 60
Email: ***@moveinnovation.dk
Web: http://www.moveinnovation.dk
Generatorvej 8b st. | 2730 Herlev | Denmark